CNC lathe operation and maintenance procedures
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2012-1-17 10:22:33 Views：
CNC lathe operation and maintenance procedures
I. Scope: All CNC lathe.
Second, the operating requirements:
1, before starting to check whether the power switch, the light is working properly, the handle position is correct, if the
CNC lathe operation and maintenance procedures
I. Scope: All CNC lathe.
Second, the operating requirements:
1, before starting to check whether the power switch, the light is working properly, the handle position is correct, if the lubricating oil to the correct standard parts.
2, the slow start the machine, listening to the sound of the transmission parts are normal, in all normal circumstances be started.
3, operation, attention should focus, not wearing gloves, except on and off the chuck. Chuck on and off the power supply must be shut off. Workpiece must stop the spindle rotation. And proper use of measuring tools.
4, a day to clean the machine and space, clear the iron to use special hooks or brush. A thorough cleaning every weekend. Strict implementation of the standard machine tool lubrication, regular maintenance of the machine, make sure the machine is working properly.
5, unusual and timely report to their superiors.
Third, the cleaning and maintenance:
1, the rail should be cleaned after every operation, turret, and oiling.
2, the rails each year on the lathe, screw, headstock, turret, brake system and electrical system for a complete overhaul.
Fourth, the procedures:
1, into the CNC turning the venue, should be subject to and shall not be allowed to start or operate CNC lathe.
2, required to wear, wear good labor protection supplies.
3, allowed to wear high heels, slippers posts, gloves and scarves are not allowed to operate.
4, power bed, lathe parts should be carefully examined whether the intact body, the transmission lever, shift lever position is correct, it should require careful maintenance of CNC machine tool lubrication.
5, operating CNC panel, the buttons and switches on the operation of not too much force, but not allowed to use a wrench or other tools to operate.
6, after completion of the knife, do simulation testing tool to prevent the occurrence of crashing when the official tools, parts, equipment or other accident.
7, in the CNC turning process, due process of time than observed operating time, so be sure to choose a good location of the observation operator is not allowed to leave their posts at random, to ensure safety.
8, the operating panel and operating CNC CNC machine tools, is prohibited both simultaneously.
9, automatically processed, the operator should focus on ideas, the left hand fingers should be placed on the stop button on the program, observe the tip movement of the eyes, right hand control override switch to control the machine running the carriage rate, identify problems in time to stop the program press button, and CNC machine tools to ensure security, prevent all kinds of accidents.
10, to work, in addition to the required maintenance of CNC machine tools, we must also do a good job shift, as necessary, do transcripts.
Number of Machinery Manufacture Co., Ltd. Taian Hai Technology Center feeds
November 15, 2011
